Vatech PAX-I User Manual

PaX-i (PCH-2500) User Manual
108
10. Disposing of the Unit
10.
Disposing of the Unit
In order to reduce environmental contamination, this equipment is designed
to be as safe as possible to use and dispose of. Many components of this
equipment, except for some like X-Ray tube, are environment-friendly and can
be recycled.
All parts and components which contain hazardous materials must be disposed
in accordance with disposal regulations. (IEC 60601-1 6.8.2 j)
Part Material Recyclable
Waste
Disposal
Site
Hazardous
waste;
Needs
Separate
Collection
Frame and covers
Aluminum
and plastics
●
Motors
●
Circuit boards
●
Cables and
transformer
Copper
●
Steel
●
Oil
●
Packing
Wood
●
Cardboard
●
Paper
●
X-Ray tube
●
Sensor head
Return the sensor head to VATECH
Other parts
●
NOTE
Please observe all regulations relevant to the disposal of
waste in your country.
WARNING
This dental equipment shall not be disposed of as domestic
garbage materials.
IMPORTANT
Please clean, disinfect and sterilize the equipment before
dissembling it and disposing of its parts.
Pi_u272_en_20180514.indd 108 2018-05-14 오전 11:03:30

Vatech PAX-I Specifications

General

Focal Spot Size	0.5 mm
Image Receptor	Digital sensor
Compatibility	DICOM 3.0
Image Detector	CMOS
Power Supply	220-240 VAC, 50/60 Hz
Sensor Type	CMOS
X-ray Generator	High Frequency
Tube Voltage	60-90 kVp
Tube Current	4-12 mA
Power Requirements	100-240V AC, 50/60Hz
Usage	Dental diagnostics