PaX-i (PCH-2500) User Manual
29
3. PaX-i Imaging System Overview
NOTE
The structural overview of the PaX-i may differ depending
on the model. For more information, refer to section 3.1.3:
The PaX-i Options.
3.3.1 Laser Beams
2
3
1-Frankfurt laser beam / 2-Mid-sagittal plane laser beam / 3-Canine laser beam
3.3.2 The Exposure Switch
The exposure switch allows the operator
to control image acquisition from outside
of the X-Ray room. Press and hold the
exposure switch down until acquisition is
complete.
Premature release of the exposure switch
will abort image acquisition. Pressing the
exposure switch activates the orange
indicator light to indicate that the X-Ray is
being emitted.
Exposure Indicator
light
- Green: Ready
- Orange: X-Ray On
Exposure Button
Pi_u272_en_20180514.indd 29 2018-05-14 오전 11:03:11
To Next Page
Loading...
