Vatech PAX-I User Manual

PaX-i (PCH-2500) User Manual
55
5. Getting Started
 5.2
Running the Image Viewer – EasyDent
EasyDent
is a basic imaging platform for all VATECH’s dental X-Ray
equipment. The
Imaging Program
is interfaced with
EasyDent.
On your desktop, double-click
EasyDent
icon or click
Start
→
All
Programs
→
EasyDent.
The
EasyDent
main window will be displayed.
Go to the
section 5.2.1 ~5.2.2
to create or open an existing patient record.
NOTE
For a detailed guide to using this software, please refer to
the EasyDent user manual.
5.2.1 Creating a New Patient Record
To create a new patient record, follow the procedure outlined below:
A. Click the
Patient icon
(
) on the upper left corner of the EasyDent’s
main GUI window.
Pi_u272_en_20180514.indd 55 2018-05-14 오전 11:03:18

Vatech PAX-I Specifications

General

Focal Spot Size	0.5 mm
Image Receptor	Digital sensor
Compatibility	DICOM 3.0
Image Detector	CMOS
Power Supply	220-240 VAC, 50/60 Hz
Sensor Type	CMOS
X-ray Generator	High Frequency
Tube Voltage	60-90 kVp
Tube Current	4-12 mA
Power Requirements	100-240V AC, 50/60Hz
Usage	Dental diagnostics