PaX-i (PCH-2500) User Manual
105
9. Cleaning and Maintenance
Accessories Cleaning Process
Computer and
peripherals
Follow the manufacturers’ instructions found in
the accompanying manuals.
Outer covers of
equipment
Wipe the unit with a dry cloth at the end of each day.
Do not use cleaning agents in
aerosol or spray form directly on
the surface of the equipment.
9.2
Maintenance
VATECH requires periodic constancy tests to ensure image quality and the
safety of the patient and operator.
Only VATECH authorized technicians can perform inspection and service of
this equipment. For the technical assistance, contact VATECH service center or
your local VATECH representative.
Maintenance Task Checklist
Maintenance Tasks
Maintenance
period
Before the operation, ensure that the equipment is clean
and ready for use. Make sure that all parts which come into
contact with the patient have been disinfected and cleaned.
Daily
After using the equipment, make sure that the main power
switch has been turned off.
Daily
Ensure that the equipment is firmly plugged into a dedicated
power source.
Daily
Ensure that the plug and power cord are not hot. Daily
Confirm that the orange (exposure) indicator lamp turns
on when the exposure switch is pressed. Ensure that the
orange (exposure) indicator light remains on for the entire
duration of the exposure.
Daily
Pi_u272_en_20180514.indd 105 2018-05-14 오전 11:03:30
To Next Page
Loading...
