Vatech PAX-I User Manual

PaX-i (PCH-2500) User Manual
117
11. Technical Specications
Detector Specications
Item
Description
PANO CEPH (optional)
Model
Xmaru1501CF Xmaru2301CF 1210SGA
Detector Type
CMOS photodiode array Amorphous silicon TFT with a scintillator
Pixel size (
㎛
)
100 127
Active area (mm)
6 x 150.4 5.9 x 230.4 264 x 325
Frame Rate
300 fps 200 fps 240 fph
Sensor size (mm)
175.4 x 86 x 21.6 251.2 x 69 x 27.1 402 x 364 x 32
A/D (bits)
14
 11.3
Electrical Specications
Item Description
Power supply voltage
AC 100 - 120 V / 200 - 240 V
-
AC 110 V / 230 V (European Union
or The rest countries)
-
AC 100 V (Japan)
-
AC 110 V (Taiwan)
-
AC 120 V (USA / Canada)
-
AC 220 V (China)
-
AC 240 V (Australia)
Frequency
50 / 60 Hz (Single)
Power rating
Max.2.0 kVA
■
The input line voltage depends on the local electrical distribution system.
■
Allowable input voltage uctuation requirement: ± 10 %.
Pi_u272_en_20180514.indd 117 2018-05-14 오전 11:03:32

Vatech PAX-I Specifications

General

Focal Spot Size	0.5 mm
Image Receptor	Digital sensor
Compatibility	DICOM 3.0
Image Detector	CMOS
Power Supply	220-240 VAC, 50/60 Hz
Sensor Type	CMOS
X-ray Generator	High Frequency
Tube Voltage	60-90 kVp
Tube Current	4-12 mA
Power Requirements	100-240V AC, 50/60Hz
Usage	Dental diagnostics