PaX-i (PCH-2500) User Manual
09
1. General Information
1.2
Manufacturer's Liability
The manufacturers and/or retailers of this equipment assume responsibility for
the safe and normal operation of this product
only when:
■
The equipment has been installed by a VATECH authorized technician.
■
The equipment has been installed in accordance with all of the cautions and
conditions for installation.
■
Genuine VATECH approved equipment and components have been used
at all times.
■
All maintenance and repairs have been performed by a VATECH authorized
agent.
■
The equipment has been used normally in accordance with the user's
manual.
■
The equipment damage or malfunction is not the result of an error on the
part of the owner or operator.
1.3
Owner and Operator's Obligations
■
The owner of this equipment shall perform constancy tests at regular intervals in
order to ensure patient and operator safety. These tests must be performed in
accordance with local X-Ray safety regulations.
■
The owner of this equipment shall perform regular inspection and maintenance of
the mechanical and electrical components in this equipment to ensure safe and
consistent operation (IEC 60601-1).
■
The owner of this equipment shall ensure inspection and cleaning works are
performed in accordance with the maintenance schedule outlined in
Chapter 9:
Cleaning and Maintenance.
Pi_u272_en_20180514.indd 9 2018-05-14 오전 11:03:08
To Next Page
Loading...
Need help?
General
