Vatech PAX-I User Manual

PaX-i (PCH-2500) User Manual
40
4. Software Overview
4.
Software Overview
2 programs come with this equipment to acquire, process, and view the image:
■
EasyDent: 2D viewer, analysis, and patient management
■
Imaging software: PANO / CEPH
 4.1
PC System Requirements (Recommended)
NOTE
- The PC system plays a large role in processing and
viewing quality images. Image quality may be diminished
if the PC specications are not met. Please adhere to the
requirements specied in the following table.
- If necessary, upgrade your PC’s system conguration to
meet the following specications.
- DO NOT place the PC or peripheral equipment connected
to the PC in the immediate vicinity of the patient.
Item Description
CPU
Intel Core i3-6100 2C 3.7GHz 2133 3MB
cache
Chipset
Intel Q170 PCH-H vPro
RAM
1x4GB DDR4-2133 DIMM (DDR4)
Hard disk drive
500GB SATA 7200 rpm
Graphic board
Integrated Intel HD 530 Graphics
Ethernet interface
Integrated Intel I219LM Gigabit Network
Intel Ethernet I210-T1 PCIe x1 Gb NIC (Option)
Serial Port RS232)
1 (On-board)
Power supply
≥ 400 Watts (92% Efciency)
Slots
2 PCI Express x 1 Slot
1 PCI Express x 16
1 PCI Express x 16(x 4)
Pi_u272_en_20180514.indd 40 2018-05-14 오전 11:03:16

Vatech PAX-I Specifications

General

Focal Spot Size	0.5 mm
Image Receptor	Digital sensor
Compatibility	DICOM 3.0
Image Detector	CMOS
Power Supply	220-240 VAC, 50/60 Hz
Sensor Type	CMOS
X-ray Generator	High Frequency
Tube Voltage	60-90 kVp
Tube Current	4-12 mA
Power Requirements	100-240V AC, 50/60Hz
Usage	Dental diagnostics