PaX-i (PCH-2500) User Manual
94
7. Acquiring CEPH Images
7.2.3 SMV Mode
Follow the procedure below to prepare and position the patient.
A. Widen the distance between the two
ear rods.
B. The nasal positioner should be ipped
to the side and up to prevent it from
obstructing the image acquisition.
C. Guide the patient to the CEPH unit.
D. Ask the patient to stand upright facing
the secondary collimator.
Make sure that the patient’s shoulders are
level and that his/her neck is relaxed.
E. Adjust the height of the unit to suit the
patient by pressing the column up/down
button or switch (optional).
After adjusting the column to suit the height of the patient,
t the ear rods along the patient’s ear canals.
Nasal positioner
Sensor
Pi_u272_en_20180514.indd 94 2018-05-14 오전 11:03:29
To Next Page
Loading...
