Vatech PAX-I User Manual

PaX-i (PCH-2500) User Manual
30
3. PaX-i Imaging System Overview
3.3.3 Emergency Stop Button
During operation, the following emergency situations may occur:
■
X-Ray emission continues after the exposure switch has been released
■
Injury to the patient or damage to the equipment
■
Other emergency situations
If a problem occurs during image acquisition, press the red emergency stop
button to immediately stop the moving parts and cut off all power to the
equipment’s electrical components.
To reset the emergency stop button, turn it clockwise until it pops up.
E
M
E
R
G
E
N
C
Y
S
T
O
P
Pi_u272_en_20180514.indd 30 2018-05-14 오전 11:03:11

Vatech PAX-I Specifications

General

Focal Spot Size	0.5 mm
Image Receptor	Digital sensor
Compatibility	DICOM 3.0
Image Detector	CMOS
Power Supply	220-240 VAC, 50/60 Hz
Sensor Type	CMOS
X-ray Generator	High Frequency
Tube Voltage	60-90 kVp
Tube Current	4-12 mA
Power Requirements	100-240V AC, 50/60Hz
Usage	Dental diagnostics