PaX-i (PCH-2500) User Manual
26
3. PaX-i Imaging System Overview
1. Signal input/output at PC
A. RS-232 in/out
B. Keyboard input
C. Mouse input
D. Video out
E. Ethernet cable: CAT5: OneShot CEPH
F. Ethernet cable: CAT5: PANO
2. Signal input/output at the column up/down switch (optional)
NOTE
Equipment connected to the signal input, signal output
or other connectors must comply with the relevant IEC
standards (e.g., IEC60950 for IT equipment and IEC60601-1
series for medical electrical equipment).
In addition, all such combination systems must comply
with IEC60601-1 and/or IEC60601-1-1 harmonized national
standards or relevant combination standards. If in doubt,
contact a qualified technician or your local VATECH
representative.
A
B
C
D
E
F
Pi_u272_en_20180514.indd 26 2018-05-14 오전 11:03:10
To Next Page
Loading...
