ROBOT HP7E / HP10E / HP12E / HP15E / HP20E 8. Maintenance
8-19© VEMAG 2010
• Take the appropriate maintenance measures.
Operating instructions for vacuum pump
• Replace the vacuum pump in the machine and retighten the two as-
sembly bolts in the baseplate.
• Reattach the hose and the connecting cable.
• Screw the sealing screw and the cable for the level switch back in.
• Put the air lter back in the service hatch.
• Close the cover and latch the toggle on the rear of the machine.
To Next Page
Loading...
