VEMAG ROBOT HP7E - 6.6.3.7 Back suction; 6.6.3.8 LPG belt speed; 6.6.3.9 Portions per minute

ROBOT HP7E / HP10E / HP12E / HP15E / HP20E 6. Graphical control
6-29© VEMAG 2010
6.6.3.7 Back suction
Display: Back suction
Selection: On / Off
Unit: Gramme [g]
Resolution: 0.1 g
Setting range: 0 – 200 g (0 - 120 g for DP machines)
Application: When switched on, back suction prevents the product
running on once a portion has ended.
• Enter back suction quantity. Entering "0" switches off the parameter.
• Press Enter.
Machines which are not equipped with the standard lling horn holder
but have a larger machine outlet may not perform back suction for safety
reasons. In this case, back suction is blocked. The back suction quantity
may not exceed the specied weight dened in weight (does not apply to
“LPG” mode).
6.6.3.8 LPG belt speed
Display: LPG belt speed
Unit: Per cent [%]
Resolution: 1 %
Setting range: 0 – 100 %
Application: Speed of the dividing belts of the LPG
• Enter belt speed.
• Press Enter.
Belt speed can be limited by lling rate and number of links.
6.6.3.9 Portions per minute
Display: Portions per minute
Unit: Number
Resolution: 0.1
Setting range: 1.0 – speed limit
Application: Cutter / continuous cutter / continuous PPM
• Enter the portions per minute.
• Press Enter.