VEMAG ROBOT HP7E - Working with the minced meat line and forming machine; 6.6.4.32 Weight groups; 6.6.4.33 Group position

ROBOT HP7E / HP10E / HP12E / HP15E / HP20E6. Graphical control
6-44 © VEMAG 2010
Working with the minced meat line and forming machine
6.6.4.32 Weight groups
Display: Weight groups
Unit: Number
Resolution: 1
Setting range: 0 (=off) – 99
Application: Forming machine FM 250 (kebab production)
• Enter the number of weight groups (e.g. number of kebab sticks)
to be produced simultaneously.
• Press Enter.
Here you dene the number of products (e.g. kebab sticks) to be produced
simultaneously. Total weight is calculated automatically and displayed.
6.6.4.33 Group position
Display: Group position
Unit: Number
Resolution: 1
Setting range: 1 – number of group portions
Application: Forming machine FM 250 (kebab production)
The group position is displayed automatically once the individual portion
weights have been entered. Enter a "1" here to start a new group
(e.g. a new stick) when the machine re-starts.
If, after 4 seconds, you want to go back to the rst portion, use the Enter
key to put a tick in the “Auto reset” eld.