VEMAG ROBOT HP7E - Working with the hanging machine; 6.6.4.17 Calibre and sausage length; 6.6.4.18 Distance from LPV 802; 6.6.4.19 Sausages before first hook

ROBOT HP7E / HP10E / HP12E / HP15E / HP20E6. Graphical control
6-38 © VEMAG 2010
Working with the hanging machine
6.6.4.17 Calibre and sausage length
Display: Calibre / Sausage length
Unit: Millimetre [mm]
Resolution: 1 mm
Setting range: 8 – 52 mm (depends on mode) / 1 – 32,000 mm
Application: Hanging
• Enter casing calibre.
• Press Enter.
Sausage length is calculated automatically in millimetres and displayed
following entry of weight and calibre. Sausage length can be altered
manually.
6.6.4.18 Distance from LPV 802
Display: Distance
Unit: Millimetre [mm]
Resolution: 1 mm
Setting range: 1 – 2,000 mm (default = 160 mm)
Application: Hanging with the LPV 802
• Enter the length of the casing guide horn.
• Press Enter.
6.6.4.19 Sausages before rst hook
Display: Sausages before rst hook
Unit: Number
Resolution: 1
Setting range: 1 – 20
Application: Hanging
• Enter the number of sausages to hang before the rst hook.
• Press Enter.