ROBOT HP7E / HP10E / HP12E / HP15E / HP20E6. Graphical control
6-30 © VEMAG 2010
6.6.3.10 Pressure control
Display: Pressure control
Unit: Bar [bar]
Resolution: 0.1 bar
Setting range: 0.1 – 20 bar / per analogue input
Application: All applications requiring a constant lling pressure
• Enter feed pressure to be maintained during lling.
• Press Enter.
After the knee lever has been actuated, the machine starts lling the pipe
system. The message "System being lled" is displayed. Pressure control
is switched off as soon as the hopper has been emptied. The message
"Hopper empty?" appears in the display.
To Next Page
Loading...
