ROBOT HP7E / HP10E / HP12E / HP15E / HP20E 6. Graphical control
6-35© VEMAG 2010
6.6.4.11 Synchronizing the machine using an external signal
Display: Portions per signals
Selection: Off / Number
Unit: Number / Milliseconds [ms] / Number
Resolution: 1 / 1 ms / 1
Setting range: 1 – 999,999 / 2 – 400 ms / 1 – 9,999
Application: Continuous mode and portioning controlled by machine
downstream (optional)
• Enter number of portions and number of signals.
• Press Enter.
• Enter tolerance.
• Press Enter.
• Enter timeout.
• Press Enter.
You can only enter the tolerance and timeout settings in the Service area.
•
To Next Page
Loading...
