ROBOT HP7E / HP10E / HP12E / HP15E / HP20E 6. Graphical control
6-47© VEMAG 2010
Working with the scale
6.6.4.38 Number of samples (VEMAG Scale 877 / Bizerba ST)
Display: Number of samples
Unit: Number
Resolution: 1
Setting range: 1 – 99
Application: Scale 877 / Bizerba ST
• Enter the number of samples to be placed on the scale.
• Press Enter.
For the check, the computer determines the weight of one portion from
this. If a new sample is expected, the corresponding information appears
in the display.
6.6.4.39 Print report (VEMAG Scale 877)
Display: Print report
Application: Scale 877
• Press the function key to have the report about the weighing
operations performed by Scale 877 printed out.
6.6.4.40 Tendency control (e.g. Process Check)
Display: Tendency control
Selection: Off / Value
Unit: Gramme [g]
Resolution: 0.1 g
Setting range: 1 – 10 g
Application: e.g. Process Check
• Enter correction for weight.
• Press Enter.
Tendency control is used to correct weight using pulses from an external
scale. Corrections may be positive or negative.
To Next Page
Loading...
