7.14 Battery Maintenance
For the battery maintenance and maintenance precautions, refer to IEEE-Std-1188-2005 and the relevant manuals provided
by the battery manufacturer.
N O T E: Periodically ch eck the screw s of the battery co nnection p arts and confirm that they are firm ly
tig htened . If there is an y loosened screw , tigh ten it im m ediately.
N O T E: Ensu re that all safety devices op erate norm ally, and that the battery manag em ent param eters
are set properly.
N O T E: M easure an d record the air tem perature inside the battery room .
N O T E: Check to ensure that the battery term inals h ave no d am age or heat generating trace, and the
battery enclosure and term inal shields are intact.
7.15 Disposal of Used Battery
If the battery has liquid leakage or is damaged, place the battery into the container that can withstand sulphuric acid and
discard it according to the local regulations.
Used lead acid storage battery belongs to dangerous waste, and it is a key item for used battery pollution control. The storage,
transportation, use, and disposal of the battery shall comply with the national and local laws and regulations on dangerous
waste and used battery pollution prevention and other standards.
According to the relevant national regulations, the used lead acid storage battery must be recycled and shall not be disposed
of with other methods. Random discard or any other improper disposal of the used lead acid storage battery may cause
severe environment pollution and the relevant person will be investigated of corresponding legal responsibilities.
7 Battery
126
Vertiv™ Liebert® APM Plus User Manual
To Next Page
Loading...
