9.2.8 SIC Card- Applicable for APAC Region
The SIC card is a network management card. It brings the network communication capability for the Liebert® UPS. It can also
support IRM series sensor to monitor environment. When the intelligent equipment generates an alarm, the SIC card can
notify the user by recording the log, sending trap information, and sending a mail. SIC card also supports Modbus RTU
protocol.
Preparation
1. Prepare the installation tools, including a cross head screwdriver.
2. Check that all installation materials are present and complete, including one SIC card.
Procedures
N O T E: There is n o need to shut dow n the UP S during SIC card installation, because the SIC card is
hot pluggab le.
W ARN ING ! S om e electronic com p onents in SIC card are sensitive to static electricity,
therefore, do not touch the electronic com ponents or circuit in SIC card b y hand or other
cond uctive m aterials, so as to protect the SIC card against static electricity. W hen rem o ving
or installing the SIC card, hold the card side edge to operate it.
Figure 9.9 Appearance of SIC card
N o. Descriptio n
1 RUN indicator
2 LAN indicator
3 COM1 port
4 COM2 port
5 Front panel
6 RJ45 port
7 USB port
9 Options
152
Vertiv™ Liebert® APM Plus User Manual
To Next Page
Loading...
