EasyManua.ls Logo

VIPA CPU 21 Series - Chapter 4 Deployment of the CPU 21 x-2 BT10 with TCP;IP

VIPA CPU 21 Series
394 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Manual VIPA CPU 21x Chapter 4 Deployment of the CPU 21x-2BT10 with TCP/IP
HB103E - Rev. 05/45 4-1
Chapter 4 Deployment of the CPU 21x-2BT10 with TCP/IP
The following chapter describes applications of the CPU 21x-2BT10 and
the communication using TCP/IP. Please regard the chapter „Fast
introduction“ where you find all information compressed required for the
project engineering of the CPU 21x-2BT10. After the fast introduction, the
mentioned steps are described in detail.
The following text describes:
Basics about a Twisted-Pair network
Project engineering of a CP communication
ORG format for the communication with a foreign system
Example
Topic Page
Chapter 4
Deployment of the CPU 21x-2BT10 with TCP/IP...........4-1
Industrial Ethernet in automation..........................................................4-2
ISO/OSI reference model.....................................................................4-3
Principles..............................................................................................4-6
Protocols..............................................................................................4-7
IP address and subnet .......................................................................4-10
Network planning ...............................................................................4-12
Communication possibilities of the CP ...............................................4-15
Function overview ..............................................................................4-18
Fast introduction................................................................................. 4-19
Hardware configuration ......................................................................4-23
Configure connections........................................................................4-26
SEND/RECEIVE with PLC program ................................................... 4-32
Project transfer................................................................................... 4-37
NCM diagnostic – Help for error diagnostic ........................................4-39
Coupling to other systems.................................................................. 4-42
Example communication CPU21x-2BT10...........................................4-45
Outline
Contents

Table of Contents

Related product manuals