Vitek VT-SRL - Event Notification

53
ON/OFF Schedule
You can activate or turn off the alarm output as scheduled.
1.
Use the [▲▼◀ ▶/ENTER] buttons on the remote control
or use the mouse to select a <DATE> for the schedule.
2.
Drag the mouse to resize the cell or use the on the
[▲▼◀ ▶] buttons to move to the cell, then press [ENTER].
3.
Select a desired alarm output mode.

ON : The alarm output is always turned on.

OFF : The alarm output is always turned off.

EVENT : Trigger the alarm output in sync with the
event.
4.
Click <COPY SCHEDULE> to copy the configured alarm schedule to the desired day(s).
5.
When done, click <OK> to apply the settings.
6.
To apply the change, click <APPLY> in the bottom of
the screen.
7.
When done, press the [EXIT] button on the remote
control or click <CLOSE> in the lower screen. The
confirmation message appears and you will return to
the previous menu.

Event Notication
Specify the methods of notification such as buzzer, video popup or email if an event occurs.
1.
From <SYSTEM SETUP> - <EVENT>, select <EVENT NOTIFICATION>.
2.
Use the [▲▼◀ ▶] buttons on the remote control or use the mouse to select one from <BUZZER>, <DISPLAY> and
<EMAIL>.
3.
Use the [▲▼◀ ▶/ENTER] buttons on the remote control or use the mouse to set the output method and duration.
4.
To apply the change, click <APPLY> in the bottom of the screen.
5.
When done, press the [EXIT] button on the remote control or click <CLOSE> in the lower screen. The confirmation
message appears and you will return to the previous menu.
System Setting