85
Display
OSD Setting
Configure the settings for the camera titles, recording
mode icons, boundary, icon and language that will be
displayed on the screen.
Make changes to each item of the OSD menu and click
<APPLY> to apply the changes.
For details about each displayed item, refer to "OSD" (page
35)
Monitor Settings
You can set the interval of an active sequence.
Specify the interval and click <APPLY> to apply it.
SEQUENCE DWELL : Switching time from one
channel to the next channel in single screen mode.
SPOT DWELL: The interval between the view types
when displaying the SPOT Out monitoring screen.
Audio
Audio/Buzzer
You can configure the settings of the voice and audio
signal.
For details about each displayed item, refer to "Audio
Setup". (page 44)
To Next Page
Loading...