Vivotek SC8131 - Event Push Settings

VIVOTEK
124 - User's Manual

26


EventPushSettings
Syntax: 
http://<ip>/cgi‐bin/admin/scevent_update.cgi?target=<value>&action=<value>&<parameter>=<val
ue>…

PARAMETER VALUE DEFAULT DESCRIPTION
target 0~5 Specifythetargetserverindex
action add,
remove,
update
 add:setupanewserverpushwithspecified
targetnumber[note.specifiedtargetnumber
mustbenotalreadyrunning]

update:modifyarunningserverpushwith
specifiedtarge tnumber[note.specified
targetnumbermustberunning]

remove:removetherunningserverpushwith
aspecifiedtargetnumber
name string[40] <blank> Nameforthisserverpush.%NinFTP
fileformatwouldbereplacedwiththisvalue.
protocol http,
email,
ftp
 Theprotocoltypesofserver
url string[128] <blank> ValidIPaddressordomainnameofserver
(onlyincludingthebasedomain
http://test.httpserver.com:8080/vivotek/push)
port 1~65535 Portnumberofservertoreceivethepushed
reports
uri string[256] <blank>
HTTP,FTP:theURIofthelocationforpush
server(e.g.http:
//test.httpserver.com:8080/vivotek/push)
SMTP:receiveremailaccount
usr string[64] <blank> Requiredusernameforserverauthorization
pwd string[64] <blank> Requiredpasswordofcorrespondingusrfor
serverauthorization
schedule 0,  Scheduletimeinseconds.onlyfollowing