Vivotek SC8131 - Activated Period

VIVOTEK
156 - User's Manual
Please follow the steps below to congure a prole:
1. Check
Enable this prole
.
2. Select the applied mode: Day mode, Night mode, or Schedule mode. Please manually enter a
range of time if you choose Schedule mode.
3. Congure Exposure control settings in the folowing columns. Please refer to previous dicussions
for detailed information.
4. Click
Save
to enable the setting and click
Close
to exit the page.
You can click
Restore
to recall the original settings without incorporating the changes. When
completed with the settings on this page, click
Save
to enable the settings.
If you want to congure another sensor setting for day/night/schedule mode, please click
Prole
to
open the Prole of exposure settings page as shown below.
Activated period: Select the mode this profile to apply to: Day mode, Night mode, or Schedule
mode. Please manually enter a range of time if you choose Schedule mode. Then check
Save
to for
the conguration take effect.