Vivotek SC8131 - Eptz Setting; Region of Interest; Storage Management Setting

VIVOTEK
262 - User's Manual
7.28 Storage management setting
Currently it’s for local storage (SD, CF card)
Group: disk_i<0~(n-1)> n is the total number of storage devices. (capability.storage.dbenabled > 0)
PARAMETER VALUE Default SECURITY
(get/set)
DESCRIPTION
cyclic_enabled <boolean> 0 6/6 Enable cyclic storage method.
autocleanup_enabled <boolean> 0 6/6 Enable automatic clean up method.
Expired and not locked media files will be
deleted.
autocleanup_maxage 1~ 7 6/6
T
o specify the expired days for automatic
clean up.
7.29 Region of interest
Group: roi_c<0~(n-1)> for n channel product, and m is the number of streams which support ROI.
(capability.eptz > 0)
PARAMETER VALUE Default SECURITY
(get/set)
DESCRIPTION
s<0~(m-1)>_home (0~1744,0~93
6)
(0,0) 7/7 ROI left-top corner coordinate.
s<0~(m-1)>_size 176~ x 144~ 2560x1920 7/7 ROI width and height. The width value
must be multiples of 16 and the height
value must be multiples of 8
7.30 ePTZ setting
Group: eptz_c<0~(n-1)> for n channel product. (capability.eptz > 0)
PARAMETER VALUE Default SECURITY
(get/set)
DESCRIPTION
osdzoom <boolean> 1 7/7 Indicates multiple of zoom in is
“on-screen display” or not
smooth <boolean> 1 7/7 Enable the ePTZ "move smoothly"
feature
tiltspeed -5 ~ 5 0 7/7 Tilt speed
(It should be set by eCamCtrl.cgi rather
than by setparam.cgi.)