Vivotek SC8131 - Image Setting Per Channel

VIVOTEK
236 - User's Manual
7.10 Image setting per channel
Group: image_c<0~(n-1)> for n channel products
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
brightnesspercent 0~100 0 4/4 Adjust brightnesspercent of
image
saturationpercent 0~100 50 4/4 Adjust saturation value of
percentage when
saturation=100
contrastpercent 0~100 50 4/4 Adjust contrastpercent of
image
sharpnesspercent 0~100 50 4/4 Adjust sharpness value of
percentage when
sharpness=100
dnr_mode 0~1 0 4/4 0:disable
1:enable
dnr_strength 1~100 50 4/4 Strength of DNR
profile_i0_enable <boolean> 0 4/4 Enable/disable this profile
setting
profile_i0_policy schedule schedule 4/4 The mode which the profile is
applied to.
profile_i0_begintime hh:mm 18:00 4/4 Begin time of schedule mode.
profile_i0_endtime hh:mm 06:00 4/4 End time of schedule mode.
profile_i0_brightnesspercent 0~100 0 4/4 Adjust brightnesspercent of
image
profile_i0_contrastpercent 0~100 50 4/4 Adjust contrastpercent of
image
profile_i0_saturationpercent 0~100 50 4/4 Adjust saturationpercent of
image
profile_i0_sharpnesspercent 0~100 50 4/4 Adjust sharpnesspercent value
of image
profile_i0_dnr_mode 0~1 0 4/4 0:disable
1:enable
profile_i0_dnr_strength 1~100 50 4/4 Strength of DNR