Vivotek SC8131 - Page 201

VIVOTEK
User's Manual - 201
To remove a recording setting from the list, select a recording name from the drop-down list and
click
Delete
.
■ Click
recording (Name)
: Opens the Recording Settings page to modify.
■ Click
ON (Status)
: The Status will become
OFF
and stop recording.
■ Click
NAS (Destination)
: Opens the le list of recordings as shown below. For more information
about folder naming rules, please refer to page 111 for details.
20150110
20150111
20150112
If you want to enable recording notification, please click
Event
to configure event triggering
settings. Please refer to Stereo Tracker > Congurations > Event settings on page 100 for more
details.
When completed, select
Enable this recording
. Click
Save
to enable the setting and click
Close
to exit this page. When the system begins recording, it will send the recorded les to the network
storage. The new recording name will appear in the drop-down list on the recording page as shown
below.