Vivotek SC8131 - Page 250

VIVOTEK
250 - User's Manual
uart_httptunnel <boolean> 0 0/7 Indicate whether to support HTTP
tunnel for UART transfer.
nprivacymask <positive
integer>
0 0/7 Number of privacy masks.
transmission_mode Tx,
Rx,
Both
Tx 0/7 Indicate transmission mode of the
machine: TX = server, Rx = receiver
box, Both = DVR.
network_wire <boolean> 1 0/7 Indicate whether to support
Ethernet.
network_wireless <boolean> 0 0/7 Indicate whether to support wireless.
wireless_s802dot11b <boolean> 0 0/7 Indicate whether to support wireless
802.11b+.
wireless_s802dot11g <boolean> 0 0/7 Indicate whether to support wireless
802.11g.
wireless_s802dot11n <boolean> 0 0/7 Indicate whether to support wireless
802.11n.
wireless_beginchannel 1 ~ 14 N/A 0/7 Indicate the begin channel of
wireless network
wireless_endchannel 1 ~ 14 N/A 0/7 Indicate the end channel of wireless
network
wireless_encrypt_wep <boolean> 0 0/7 Indicate whether to support wireless
W E P.
wireless_encrypt_wpa <boolean> 0 0/7 Indicate whether to support wireless
WPA.
wireless_encrypt_wpa2 <boolean> 0 0/7 Indicate whether to support wireless
WPA2.
localstorage_managea
ble
<boolean> 1 0/7 Indicate whether manageable local
storage is supported.
localstorage_seamless <boolean> 1 0/7 Indicate whether seamless recording
is supported.
localstorage_modnum 0,
<positive
integer>
4 0/7 The maximum MOD connection
numbers.