Vivotek SC8131 - Page 5

VIVOTEK
User's Manual - 5
■ Rev. 1.4:
• Added the description for video Stitching that brings up to 7 SC8131s together to
provide video analytics over a large and wide oor plan.
• Added the description for Tilt, and Object type.
• Moved the Tracking and Counting conguration section further up near the beginning of
the manual.
• The description for the U turn counting rules options was also included.
• The later rmware revision removed the audio functions.
• Added notications that the height of the camera canister (4cm) must be deleted if the
ceiling height is measured from oor to ceiling.
■ Rev. 1.5:
• Corrected DI/DO pin related description.
■ Rev. 1.6:
• Added the installation height FOV tables for SC8131-F2, -F4, and -F6.
■ Rev. 1.7:
• Added description for Queue Analysis and service time counting. See page 79.
• Added description for Tampering detection. See page 84.
• Added description for Passer-by counting. See page 78.
• Updated event rule parameters.
• Updated Report Push options, w/ device local time, camera status ags, counting/zone
contents, Queue raw data. See page 85.
• Updated FTP report filename format to accommodate report time format in different
countries. See page 88.
• Added log database IDs via Restful api and Report Push.
• Added a note for browsing SC8131s with different versions of rmware.
• The multiple-camera stitching procedure can now take place among cameras at once,
instead of stitching between two cameras at one time.
■ Rev. 1.8:
• Updated LED behaviors.