2-100 CO Tolerance
Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
CO Tolerance
Description
This feature allows you to compensate for CO lines that have high Db levels. Such lines are
typically found when a customer location is close to a CO location. In certain instances this
can cause the keyset to produce undesireable speakerphone effects.
Programming Steps
1. Press FLASH and dial [41]. The following message displays:
2. Press Button #11. The following message displays:
3. Enter a valid number on the dial pad.
[0] = Disabled (Close to a CO)
[1] = Enabled (Normal CO condition)
4. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT … Enabled (1) is the default.
CO FEATURES
ENTER BUTTON NUMBER
CO TOLERANCE 0-1
ENABLED
To Next Page
Loading...
