2-18 Battery Backup (Memory)
Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 is lit. The display updates to reflect current programming for Page A:
4. Press button #22. The display updates to reflect current programming for Page D.
5. Press Button #7. The following message displays:
6. Enter a valid number on the dial pad to change this feature.
0 = Off
1 = On
2 = In Use
7. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT … Off.
Operation
To select another Back Light Display option:
1. Preprogram a Back Light Display flexible button, using flexible feature code 637.
2. Press the Back Light Display flexible button to rotary through the options.
Battery Backup (Memory)
Description
A lithium battery is located on the Main Board Unit (MBU) to protect system memory in case
of commercial power outage or the system power being turned off for a time period.
Battery Backup Memory retains all system features including system and station speed dial
during a power outage.
Flash 50 - Fixed Numbers Flash 51 - Flexible Numbers
XXX - XXX PAGE A
ENTER BUTTON NUMBER
SXXX PAGE A
ENTER BUTTON NUMBER
XXX-XXX = fixed station range XXX = 3- or 4-digit flexible number
Flash 50 - Fixed Numbers Flash 51 - Flexible Numbers
XXX - XXX PAGE D
ENTER BUTTON NUMBER
SXXX PAGE D
ENTER BUTTON NUMBER
XXX-XXX = fixed station range XXX = 3- or 4-digit flexible number
BACK LIGHT 0-2
OFF
To Next Page
Loading...
