2-40 Call Forward - Preset
Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
Programming Steps
1. Press FLASH and dial [40]. The following message displays:
2. Enter a valid number for the range of lines being programmed. If only one line is being
programmed, enter that number twice (001 001).
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible Button #19 (Page A) is lit.
4. Press the Page B flexible button (Button #20). The following message displays:
XXX-XXX = CO Line Range
5. Press the PRESET FWD DAY DESTINATION flexible button (Button #5). The following
message displays:
6. Enter a valid forward destination on the dial pad.
[100-149] = Station Extensions
[440-447] = Voice Mail Groups 1-8
[450-457] = Hunt Groups 1-8
[550-565] = UCD Groups 1-16
7. Press HOLD. A confirmation tone sounds and the LCD display updates.
8. Press the PRESET FWD NIGHT DESTINATION flexible button (Button #16). The following
message displays:
9. Enter a valid forward destination on the dial pad.
[100-149] = Station Extensions
[440-447] = Voice Mail Groups 1-8
[450-457] = Hunt Groups 1-8
[550-565] = UCD Groups 1-16
10. Press HOLD. A confirmation tone sounds and the LCD display updates.
CO LINE ATTRIBUTES
SELECT A CO LINE RANGE
If HOLD is pressed without entering a CO range, all CO lines are selected.
XXX - XXX PAGE B
ENTER BUTTON NUMBER
PRESET FORWARD DAY DEST
####
PRESET FWD NIGHT DEST
####
To Next Page
Loading...
