2-230 Muted Ring
Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
Muted Ring
Description
The Muted Ring feature provides the ability to set the system so that telephones will ring at a
muted level (lesser volume than normal ringing) to alert a station user on an active call that
another call is inbound.
Programming
1. Press FLASH and dial [09].
2. Press the MUTE RING flexible button (Button #12). The following message displays:
3. Dial a valid Muted Ring code (0-2).
0 = KSU (Muted Ring is controlled by KSU software)
1 = KEYSET (Muted Ring is controlled by keyset firmware)
2 = OFF (Muted Ring is disabled)
4. Press [HOLD]. A confirmation tone sounds.
DEFAULT … Ring code 0, where Muted Ring is controlled by KSU software.
MUTE RING 0-2
KSU
To Next Page
