LCOB Loop Length 2-223
Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
LCOB Loop Length
Description
This feature is used to effectively reduce side tone when using LCOBC or LCOBE. When your
system is located a short distance from the telephone company (Telco), use the Short option.
When your system is located a long distance from the Telco, use the Long option.
Programming Steps
1. Press FLASH and dial [41]. The following message displays:
2. Press Button #8. The following message displays:
3. Enter a valid number on the dial pad.
[0] = Short
[1] = Long
4. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT … The Long option (1) is the default.
Leading Digit
Description
System administrators can tailor the system numbering plan to change all 3-digit numbers
into 4-digit numbers that begin with a desired digit 0-8.
Programming Steps
1. Press FLASH and dial [09]. The following message displays:
2. Press Button #9. The following message displays:
3. Dial a valid number (0-8) to identify the desired leading digit.
4. Press HOLD to save the entry.
CO FEATURES
ENTER BUTTON NUMBER
LCOB LOOP LENGTH 0-1
LONG
SYSTEM PARAMETERS
ENTER BUTTON NUMBER
LEADING DIGIT 0-8
0
Only 3-digit codes will be changed to include a leading digit, e.g., 2-digit codes
such as group call pickup (#0) are not affected.
To Next Page
Loading...
