2-298 System Reset
Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
Programming Steps
1. Press the SYSTEM PARAMETERS flexible button (FLASH 85, Button #1). The following
message displays:
2. To print the System Parameters database, press the HOLD button. The following message
displays:
When the system finishes sending the information to the printer, a confirmation tone
sounds.
System Reset
Description
The System Reset feature provides a hard system reset from the keyset instead of the KSU.
This is useful in cases where miscellaneous data errors have occurred and the system needs
to be reset without initializing the entire database.
Programming Steps
If the System must be reset but not initialized:
1. Press the RESET flexible button (FLASH 80, Button #20). The following message displays:
2. To reset the system without initializing the database, press the HOLD button. No
confirmation tone sounds and the system resets.
PRINT SYS PARAM
PRESS HOLD
PRINT SYS PARAM
RESET SYSTEM
PRESS HOLD
To Next Page
Loading...
