Baud Rate Assignments 2-19
Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
Baud Rate Assignments
Description
The two RS-232 connectors on the BKSU can support features such as SMDR, ICLID, or remote
programming.
PORT #1 -- First RS-232C port on the BKSU
PORT #2 -- Second RS-232C port on the BKSU
PORT #3 -- Optional modem
Programming Steps
Press FLASH and dial [15]. The first button is lit and ready for programming Port #1. The
following message displays:
1. Press the desired PORT # flexible button (Buttons #1, #2, or #3) to select the port to
program.
2. Enter a 1-digit number for the baud rate:
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT . . . Ports #1, #2, and #3 are set at the 9600 baud rate. The highest connection rate
for ports #1 and #2 is 9600 baud, but the system will connect at lower speeds if necessary.
PORT BAUD
1 9600
[1] = 150 Baud [5] = 2400 Baud
[2] = 300 Baud [6] = 4800 Baud
[3] = 600 Baud [7] = 9600 Baud
[4] = 1200 Baud
The optional modem (port 3) has a fixed baud rate of 9600.
To Next Page
Loading...
