Direct Inward Dialing 2-121
Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
Music-On-Hold (per CO Line)
Description
This feature allows a specific MOH channel to be associated with a route.
Programming Steps
1. Press FLASH and dial [43]. The Button #1 LED is illuminated and the following message
displays:
000 = Route Number (000-251)
DDDD = 3- or 4-Digit Ringing Destination Number
R = Ringing Type
2. Enter a valid number for the route to be programmed.
3. Press the MUSIC-ON-HOLD flexible button (Button #7). The following message displays:
4. Enter a valid number on the dial pad to change this feature.
[0] = No Music-On-Hold
[1] = Channel 1
:::::
[8] = Channel 8
5. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT … Channel 1 is used for Music-On-Hold.
ROUTE 000 DDDDRR
MOH CHANNEL 0-8
1
Table 2-7: MOH Programming Codes
Program
Code
Flexible
Button
Feature
Default
(after initialization)
FLASH 09 2
3
4
5
6
Music Channel #4*
Music Channel #5*
Music Channel #6*
Music Channel #7*
Music Channel #8*
##
##
##
##
##
* Music Channels 4-8 can only be used for Music-On-Hold functions
To Next Page
Loading...
