Vodavi Starplus STSe - Call Park; Call Park - System

2-44 Call Park
Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
Call Park
Call Park - System
Description
An external call can be placed into one of 14 system park locations and can be retrieved by
any station that has a direct line appearance or an available Loop button. Parked calls have
their own recall timer that recalls the originating station, and if still unanswered, the
Attendant(s).
Operation
To park a call, either:
1. Press the TRANS button. The caller will be put on hold.
2. Dial the parking location (424 to 437). A confirmation tone will sound.
3. If a busy tone is received, press TRANS twice and dial another park location, or press the
CALL PARK flexible button for a different parking location.
-or-
1. Press the CALL PARK flexible button. The caller will be parked at the location
programmed on the button.
2. If a busy tone is received, press TRANS twice and dial another park location, or press the
CALL PARK flexible button for a different parking location.
To retrieve a parked call:
1. Lift the handset or press the ON/OFF button.
2. Press [#].
3. Dial parking location (424 to 437) where call was parked, or press the preprogrammed
PARKED CALL PICKUP flexible button.
-or-
Use the Soft Key’s P-PKP 1 option when in an idle condition (to pickup from park
location 1 only).
To create a PARKED CALL PICKUP button:
1. Press [SPEED] + [SPEED].
2. Press the desired flexible button.
3. Dial [#] + the desired parking location (424-437).
 SINGLE LINE TELEPHONE
To park a call:
1. Press the FLASH button. The caller is put on Exclusive Hold.
2. Dial parking location (424-437). A confirmation tone will sound.
3. If busy, press the FLASH button twice and dial another park location.