Vodavi Starplus STSe - Ring down; Hot Line; Off-Hook Preference

Ring Down / Hot Line / Off-Hook Preference 2-263
Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
Ring Down / Hot Line / Off-Hook Preference
Description
The Off-Hook Preference feature can be used by both keyset station users and SLT station
users. The next two sections describe the feature with respect to how it applies to a keyset
user and then as to how it applies to the SLT user.
Keyset Users
The Off-Hook Preference feature lets a keyset station user automatically have the function of
a designated flex button applied when going off-hook or when pressing the ON/OFF button.
If allowed in the following described programming, keyset station users can select and/or
change their off-hook preference through the use of a dial code [691]+BB (01-24). Dialing
[691]+00 disables Off-Hook Preference.
Auto Feature Access -- In addition to Auto Line Access, digital telephones have the ability to
have their off-hook preference select a DSS or feature button upon going off-hook or
pressing the ON/OFF button.
Auto Line Access -- Each keyset station may have their phone programmed to access a
particular CO Line (such as a private line or a line from a group of CO lines) upon going
off-hook. This is useful in Centrex or PBX applications when station users have dedicated
lines. Outside line dial tone is received just by going off-hook, without the need to dial an
access code.
Hot Line/Ring Down -- Each keyset station may be programmed to immediately call or ring
down a particular station or outside number upon going off hook. This is done by
programming the station’s Off-Hook Preference to activate a DSS or Speed Dial feature key.
This feature can be overridden if the station user selects a CO line first when going off-hook.
Intercom Access -- When Off-Hook Preference is enabled for a keyset station, that station may
still obtain intercom dial tone for accessing internal stations or other system features. This is
done either by pressing a DSS button or by dialing their own intercom station number prior
to going off-hook.
User Programmable Preference -- Based on a station programmable option, digital
telephones may be given the ability to enable, disable, or change their Off-Hook Preference
by dialing a code. This option can be denied in station programming on a per key station
basis.
Use Flash 50 programming when you want to modify a range of stations’ attributes using
fixed station numbers.
Use Flash 51 programming to modify a single station’s attributes using a flexible station
number.