2-264 Ring Down / Hot Line / Off-Hook Preference
Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
SLT Users
The Off-Hook Preference feature lets an SLT station user have one of the following functions
applied when going off-hook or when pressing the ON/OFF button.
After enabling Off-Hook Preference for an SLT in the following described programming, it is
necessary to program the function to be applied when going off-hook. To program this, refer
to “To assign an Off-Hook Preference function for an SLT:” on page 2-166.
An SLT user can press the FLASH button and dial their own number to override Off-Hook
Preference and gain intercom access.
Use Flash 50 programming when you want to modify a range of stations’ attributes using
fixed station numbers.
Use Flash 51 programming to modify a single station’s attributes using a flexible station
number.
Programming Steps
1. Press FLASH and dial [50] or dial [51]. Flexible button #24 (New Range) is lit and one of
the following messages displays:
2. Enter the range of fixed station numbers (100-149) to be programmed. If only one station
is being programmed, enter that number twice, e.g., [100 100].
-or-
Enter a valid flexible number (100-8999) to be programmed.
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 is lit. The display updates to reflect current programming for Page A:
CO Line Access LCR Call to Hunt Group Call to Voice Mail
CO Line Group
Access
Call to a
station
Call to UCD Group
Flash 50 - Fixed Numbers Flash 51 - Flexible Numbers
STATION ATTRIBUTES
SELECT A STATION RANGE
ENTER STATION NUMBER
If HOLD is pressed without entering a station range, all stations are selected.
Flash 50 - Fixed Numbers Flash 51 - Flexible Numbers
XXX - XXX PAGE A
ENTER BUTTON NUMBER
SXXX PAGE A
ENTER BUTTON NUMBER
XXX-XXX = fixed station range XXX = 3- or 4-digit flexible number
To Next Page
Loading...
