Call Forward - Preset 2-41
Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
11. Press the PRESET FWD SPECIAL DESTINATION flexible button (Button #17). The following
message displays:
12. Enter a valid forward destination on the dial pad.
[100-149] = Station Extensions
[440-447] = Voice Mail Groups 1-8
[450-457] = Hunt Groups 1-8
[550-565] = UCD Groups 1-16
13. Press HOLD. A confirmation tone sounds and the LCD display updates.
DEFAULT … No destinations are assigned.
Conditions
» Preset Call Forwarding (CO Line) will not occur if initial ringing is to a group, e.g., UCD, VM,
or hunt group.
Preset Forward Voice Mail ID
Description
The Preset Forward Voice Mail ID feature allows a programmer to assign which digits are sent
to voice mail when a CO line is programmed to Preset Forward.
Programming Steps
1. Press the PRESET FWD VMID flexible button (FLASH 40, Page B, Button #6). The
following message displays:
2. Enter a valid number on the dial pad that corresponds to 0-9999 for Voice Mail ID digits.
3. Press HOLD to complete the entry. A confirmation tone sounds and the display updates.
To delete numbers currently entered:
1. Press [#] button four times.
2. Press the HOLD button to update (all information is erased).
DEFAULT … No digits are sent.
PRESET FORWARD DAY DEST
####
PRESET FORWARD VMID 0-9999
####
To Next Page
Loading...
