2-198 ISDN Programming - Page A
Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
Framing
Description
Framing options include T1, ESF, and D4.
Programming Steps
1. Press the FRAMING flexible button (FLASH 45, Page A, Button #3).
2. To view a Framing setting, enter a valid number (0-2).
0 = T1
1 = ESF
2 = D4
DEFAULT … ESF is the framing setting.
Power
Do not change the Power setting unless advised to do so by Technical Support.
Programming Steps
1. Press the POWER flexible button (FLASH 45, Page A, Button #5).
2. Enter a 0 or 1 on the dial pad to enable/disable this feature.
[0] = Disabled
[1] = Enabled
3. Press the HOLD button. A confirmation tone sounds and the display updates.
DEFAULT - Power is disabled.
Directory Number - PRI
Description
The Directory Number is the main number of the PRI lines and it will be viewed by the called
party on their caller ID display.
Programming Steps
1. Press the DIRECTORY NUMBER flexible button (FLASH 45, Page A, Button #6).
FRAMING 0-2
ESF
POWER 0-1
DISABLED
DIRECTORY NUMBER 0-9, *,#
To Next Page
Loading...
