Direct Inward Dialing 2-125
Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 (Page A) is lit. The following message displays to indicate current
programming of that line or group of lines:
XXX-XXX = CO Line Range
4. Press Button #14. The following message displays:
5. Dial a valid number (0-2) on the dial pad.
[0] = Immediate Start
[1] = Wink Start
[2] = Delay Start
6. Press HOLD to save the entry.
DEFAULT … DID/TIE Signaling is set to Wink Start.
XXX - XXX PAGE A
ENTER BUTTON NUMBER
DID/TIE SIGNALING 0-2
WINK
To Next Page
Loading...
