2-148 Do Not Disturb / Page Block
Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 is lit. The display updates to reflect current programming for Page A:
4. Press the DO NOT DISTURB flexible button (Button #2). The following message displays:
5. Enter a 0 or 1 on the dial pad to enable/disable this feature.
[0] = Disabled
[1] = Enabled
6. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT … Do Not Disturb / Page Block is enabled at all digital stations. Do Not Disturb is
enabled at all SLT stations.
Operation
To activate Do Not Disturb:
Press the preprogrammed DND button once (DND button lights steady). The DND button
can be pressed while the phone is ringing to stop the ringing.
-or-
Use the Soft Key’s DND option when in an idle condition.
To activate Page Blocking:
Press the preprogrammed DND button a second time (DND button flashes).
-or-
Use the Soft Key’s DND option a second time when in an idle condition.
To remove Do Not Disturb:
Press the preprogrammed DND button a third time, use the Soft Key’s DND option a third
time, or dial either [631] or [662]. The button LED extinguishes and DND cancels.
SINGLE LINE TELEPHONE
To activate Do Not Disturb:
1. Lift the handset.
2. Dial [631].
3. Replace the handset.
Flash 50 - Fixed Numbers Flash 51 - Flexible Numbers
XXX - XXX PAGE A
ENTER BUTTON NUMBER
SXXX PAGE A
ENTER BUTTON NUMBER
XXX-XXX = fixed station range XXX = 3- or 4-digit flexible number
DO NOT DISTURB 0-1
ENABLED
To Next Page
Loading...
