Flexible Button Function Assignment 2-165
Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 is lit. The display updates to reflect current programming for Page A:
4. Press button #20. The display updates to reflect current programming for Page B.
5. Press the BUTTON ASSIGN flexible button (Button #11). The following message displays:
6. Enter a valid button number [01-24] to program, the desired function code (0-4 or #) plus
any related information (e.g., CO line number if assigning a CO Line button), and then
press HOLD.
Function Codes
[0] = Flexible/user changeable
[1] = CO line
[2] = Loop button/all-purpose CO appearance
[3] = Pool for specific groups
[4] = Direct feature programmable
[#] = Locks button
To assign a Flexible Button (user programmable):
Enter [BB], [0], [HOLD]
BB = Desired Flexible Button Number
When a button is assigned as a flexible button [0], the user can program any features or
functions to which they have access on the buttons.
Flash 50 - Fixed Numbers Flash 51 - Flexible Numbers
XXX - XXX PAGE A
ENTER BUTTON NUMBER
SXXX PAGE A
ENTER BUTTON NUMBER
XXX-XXX = fixed station range XXX = 3- or 4-digit flexible number
Flash 50 - Fixed Numbers Flash 51 - Flexible Numbers
XXX - XXX PAGE B
ENTER BUTTON NUMBER
SXXX PAGE B
ENTER BUTTON NUMBER
XXX-XXX = fixed station range XXX = 3- or 4-digit flexible number
FLEX BUTTON PROG
ENTER BUTTON DATA
To Next Page
