Flexible Button Function Assignment 2-167
Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
To assign a CO Line Group access function:
Enter: [01], [3], [GG], [HOLD]
GG = Line Group Number (00-23)
To assign other functions:
Enter [01], [4], [XXX], [HOLD]
XXX = Desired Flexible Feature Code
Operation
To program a user-programmable Flexible Button:
1. Press the SPEED button twice.
2. Press the desired button to program (it must be programmed in the database as a
multifunction button).
3. Dial the desired feature code. Refer to “Default Numbering Plan” on page F-16.
To erase a user programmable Flexible Button:
1. Press the SPEED button twice.
2. Press the button to erase.
3. Press the FLASH button. Confirmation tone sounds.
4. Replace handset or press ON/OFF button.
Conditions
» Only one station at a time can be programmed when using a flexible station number.
» When in Flash 51 programming, if you press HOLD without specifying a flexible number
to be programmed, you will get the station that is in port/station 100.
Possible functions to assign for SLT Off-Hook Preference include: CO Line access,
CO Line Group access, LCR, call to a station, call to a Hunt Group, call to a UCD
Group, Call to Voice Mail.
To Next Page
Loading...
