Station Attributes 2-281
Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
Programming Steps
1. Press the STATION ATTRIBUTES flexible button (FLASH 80, Button #3). The following
message displays:
2. Press the HOLD button. A confirmation tone sounds.
13 Voice Mail ID Translation XXXX=Station #
14 Display Flexible Buttons None
15 Light Control 0=None
17 Cordless Key Telephone Unit (CKTU) Button 00=No button assigned
18 Headset Mode 1=2.5 mm jack
FLASH 50/51 1 Internal No Answer Forward None
PAGE C 2 Internal Busy/DND Forward None
3 Day External No Answer Forward None
4Day External Busy/DND Forward None
5 Day No Answer Timer 10 sec
7 SLT Loop Supervision Enabled
13 Distinctive Ring Tone - Station 00
14 Night External No Answer Forward None
15 Night External Busy/DND Forward None
16 Special External No Answer Forward None
17 Special External Busy Forward None
18 Call Coverage Ring Timer 05 sec
FLASH 50/51 1 Tenant Group Assignments Group 0
PAGE D 3 Internal DND Forward None
4 External DND Forward None
5 Night No Answer Timer 10 sec
6 Special No Answer Timer 10 sec
7 Back Light Display 0 = Off
INITIALIZE STATIONS
PRESS HOLD
Table 2-23: Station Attribute Defaults
Program
Code
Flexible
Button
Features
Default Value
(after initialization)
To Next Page
