2-284 Station Identification
Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
2. Enter the range of fixed station numbers (100-149) to be programmed. If only one station
is being programmed, enter that number twice, e.g., [100 100].
-or-
Enter a valid flexible number (100-8999) to be programmed.
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 is lit. The display updates to reflect current programming for Page A:
4. Press button #20. The display updates to reflect current programming for Page B.
5. Press the STATION ID flexible button (Button #1).
6. Enter a valid code number on the dial pad to identify type of device:
If HOLD is pressed without entering a station range, all stations are selected.
Flash 50 - Fixed Numbers Flash 51 - Flexible Numbers
XXX - XXX PAGE A
ENTER BUTTON NUMBER
SXXX PAGE A
ENTER BUTTON NUMBER
XXX-XXX = fixed station range XXX = 3- or 4-digit flexible number
Flash 50 - Fixed Numbers Flash 51 - Flexible Numbers
XXX - XXX PAGE B
ENTER BUTTON NUMBER
SXXX PAGE B
ENTER BUTTON NUMBER
XXX-XXX = fixed station range XXX = 3- or 4-digit flexible number
STATION ID 0-8
KEYSET - STSE 24BTN
Code Device Part Number
[0] STSe 24-Btn Phone 3515
[1-3] DSS Console w/map 1-3 3510
[6] SLT w/o Msg Wait Vodavi SLTs w/o Msg Wait
[7] SLT w/Msg Wait (90 VDC) Vodavi SLTs w/Msg Wait
[015] SLA 3854 & 9854
[9] Virtual Station --
[019] KTS 24-Btn (Remote IP Telephone) 3813
[020] Door Box 3560
* = Codes available w/ver 1.01P05 or higher
To Next Page
Loading...
