2-36 Call Forward - Preset
Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
2. Enter the range of fixed station numbers (100-149) to be programmed. If only one station
is being programmed, enter that number twice, e.g., [100 100].
-or-
Enter a valid flexible number (100-8999) to be programmed.
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 is lit. The display updates to reflect current programming for Page A:
4. Press button #21. The display updates to reflect current programming for Page C.
Internal No Answer Destination
1. Press Button #1. The following message displays:
2. Enter a valid flexible destination number and press HOLD.
3. To delete the entry, press the [#] key and then press HOLD.
Internal Busy/DND Destination
1. Press Button #2. The following message displays:
2. Enter a valid flexible destination number and press HOLD.
3. To delete the entry, press the [#] key and then press HOLD.
If HOLD is pressed without entering a station range, ALL stations are selected.
Flash 50 - Fixed Numbers Flash 51 - Flexible Numbers
XXX - XXX PAGE A
ENTER BUTTON NUMBER
SXXX PAGE A
ENTER BUTTON NUMBER
XXX-XXX = fixed station range XXX = 3- or 4-digit flexible number
Flash 50 - Fixed Numbers Flash 51 - Flexible Numbers
XXX - XXX PAGE C
ENTER BUTTON NUMBER
SXXX PAGE C
ENTER BUTTON NUMBER
XXX-XXX = fixed station range XXX = 3- or 4-digit flexible number
INTERNAL NO ANSWER FWD
####
INTERNAL BUSY FWD
####
To Next Page
Loading...
