2-48 Call Pickup
Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
2. Enter the range of fixed station numbers (100-149) to be programmed. If only one station
is being programmed, enter that number twice, e.g., [100 100].
-or-
Enter a valid flexible number (100-8999) to be programmed.
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 is lit. The display updates to reflect current programming for Page A:
4. Press button #20. The display updates to reflect current programming for Page B.
5. Press the GROUP PICKUP flexible button (Button #5). The following message displays:
6. Enter a valid number (1-8) to program Pickup Groups.
7. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT … All stations are in Group 1.
Conditions
» Only one station at a time can be programmed when using a flexible station number.
» When in Flash 51 programming, if you press HOLD without specifying a flexible number
to be programmed, you will get the station that is in port/station 100.
If HOLD is pressed without entering a station range, all stations are selected.
Flash 50 - Fixed Numbers Flash 51 - Flexible Numbers
XXX - XXX PAGE A
ENTER BUTTON NUMBER
SXXX PAGE A
ENTER BUTTON NUMBER
XXX-XXX = fixed station range XXX = 3- or 4-digit flexible number
Flash 50 - Fixed Numbers Flash 51 - Flexible Numbers
XXX - XXX PAGE B
ENTER BUTTON NUMBER
SXXX PAGE B
ENTER BUTTON NUMBER
XXX-XXX = fixed station range XXX = 3- or 4-digit flexible number
PICKUP GROUPS 01-20
1
[01] = Group 1 [06] = Group 6 [11] = Group 11 [16] = Group 16
[02] = Group 2 [07] = Group 7 [12] = Group 12 [17] = Group 17
[03] = Group 3 [08] = Group 8 [13] = Group 13 [18] = Group 18
[04] = Group 4 [09] = Group 9 [14] = Group 14 [19] = Group 19
[05] = Group 5 [10] = Group 10 [15] = Group 15 [20] = Group 20
To Next Page
Loading...
